Wide range of non-pressure systems for design and construction of storm water, domestic and industrial sewerage pipelines based on PE and PVC-U pipes are certified according to EU and national regulations.
Leak integrity during the operation – not less than 50 years
Resistance to dynamic and static load
Reliability at ground movement, seismic resistance
High chemical resistance, no corrosion, no biofouling and significant deposits
High wear resistance
Wide range of fittings and manholes
Various engineering solutions for collection, treatment and disposal of wastewater available
Easy assembly, reliability and operating efficiency
|
CORSYS® |
PERFOCOR |
CORSYS PLUS |
CORSYS ARM |
SPIROLINE |
PVC-U |
|
CORSYS® |
PERFOCOR |
CORSYS PLUS |
CORSYS ARM |
SPIROLINE |
PVC-U |
|
|---|---|---|---|---|---|---|
|
DN/OD, mm |
110-1200 |
75-630 |
|
|
|
110-500 |
|
DN/ID, mm |
200-1000 |
200-600 |
1200-3000 |
800-2400 |
360-2800 |
|
|
Sub-sewers, connections to the main sewers |
|
|
|
|
|
|
|
Main sewers (main culverts) |
|
|
|
|
|
|
|
Storm water |
|
|
|
|
|
|
|
Land and building drainage |
|
|
|
|
|
|
|
Drainage systems |
|
|
|
|
|
|
|
Low pressure piping systems (up to 0.5 MPa) for siphons, water intakes, deep-water outlets, etc. |
|
|
|
|
|
|
|
Pipeline renovation even under operation |
|
|
|
|
|
|
|
Relining |
|
|
|
|
|
|
Wide range of standard and custom-made manholes available, even for the most challenging projects.
TALIS knife gate valves are used for flow cut-off in water disposal pipelines. Their major design advantage is a full bore at open state, which minimises pressure loss. Patented U-shape seal provides leak integrity in both flow direction and gate cleaning, straight surface of the saddle prevents the deposit built-up.
Valves with metal-to-metal sealing are used for the flow cut-off when fluids are non-aggressive towards materials: sewage, raw and grey water. Full bore provides minimal head loss.
The gate valves are used when full or partial flow cut-off is required. Module structure allows various design modification to customer’s request.
Air valves are designed for the protection of sewage pumping stations and pipelines from damage caused by air (no air) in the system. Return valves protect pumping equipment and pipelines from return flow. They require low maintenance. The design of ball and butterfly return valves is 100% compatible with other types of TALIS valves.
TALIS fittings: various flange adapters for NPVC pipes allow transition to pipe made of other materials (steel, cast-iron and other), couplers, dismantling joints. They are useful for installation and dismantling of equipment and can be used for connection of two segments of the pipeline.
Surface water treatment units are designed for cleaning drainage water to the discharge standards for city sewage or other water sites of category I and II.
Disposal of surface flow is conducted in accordance with Water Code of Russian Federation, Federal Law of Russian Federation “On environmental protection” and requirements towards surface water protection. Disposal of drainage water must be done with the compulsory treatment of drainage water depending on the conditions of the discharge.
POLYPLASTIC Group’s specialists provide project technical support for:
Customers – feasibility study of the design solution in terms of
maintenance and operation.
Design
organisations – selection of project solution to the technical requirements towards treatment of
waste water, positioning of water treatment unit upon the design, selection of properties depending
on the load, calculation of the quality of treatment.
Construction companies – services of supervision installation,
technical consulting during construction
Reservoirs are designed for storage of grey water, non-potable liquids and fire fighting water storage.