Industrial piping systems based on PE and special compounds manufactured for abrasive and corrosive fluids transportation even at high temperatures.
It can be used as fire water supply system at high fire and explosion hazardous industrial facilities.
All products are certified.
Industrial polymer piping system
No need in electrochemical protection of the pipelines including ground current
Reduced installation timescales by 2–2.5 times comparing to steel pipes.
Less deposits on the pipe wall comparing to the steel pipes
High chemical resistance, no corrosion
Resistance to dynamic and static loads, seismic resistance
MULTIPIPE WR |
MULTIPIPE WR |
MULTITHERM |
MULTIPIPE FR |
|
Diameters |
110-1200 |
110-1200 |
16-1600 |
63-400 |
Operating pressure, up to |
PN25 |
PN25 |
PN10 |
PN20 |
Temperature of fluid, up to |
40°C |
40°C |
80°C |
40°C |
Pipe material |
PE 100/ DTEP |
PE 100/ PP/ DTEP |
PE-RT |
PE 100 / FR compound |
Wear-resistant inner layer |
|
|
WR option |
|
Fire resistant outer layer |
FR option |
|
Industrial pipelines for abrasive suspensions and/or pulp |
|
|
WR option |
|
Industrial pipelines for high temperature corrosive fluids |
|
|
|
|
Fire-fighting systems, water pipelines at high fire and explosion hazard zones |
FR option |
|
FR option |
|
Above-ground application |
|
|
PROTECT option |
|
|
MULTIPIPE WR |
MULTIPIPE WR |
MULTITHERM |
MULTIPIPE FR |
|
MULTIPIPE WR |
MULTIPIPE WR |
MULTITHERM |
MULTIPIPE FR |
|
MULTIPIPE WR |
MULTIPIPE WR |
MULTITHERM |
MULTIPIPE FR |
|
Spigot fittings |
|
|
|
|
Electrofusion fittings |
|
|
|
|
Segmented fittings |
|
|
|
|