✖
» Cable protection

Cable protection pipe systems

Cable protection systems based on PE and PVC-U pipes manufactured according to EU and national regulations.

  • RADBOX modular system

  • 1. ELECTROPOP OS

    2. ELECTROPOP

    3. ELECTROPOP PRO

  • Manholes KKSP-PRO

  • Transformer substation

The risk of cable damage
increases during snowfall.

Before
After

Risk of electric shock due to broken cable

Risk of emergency road due to a cable break

Non-aesthetic streets and architecture

Before
After

Pedestrian safety

Trouble free traffic

Beautiful modern city

Extended service life - at least 50 years

No corrosion

Easy installation: flexibility and light weight

Wide range of accessories and equipment

Application

Power supply and telecom: simplifies laying underground and protects cables from mechanical damage

Transport infrastructure and monolithic concreting: laying underground along and under roads, railways and airports runways

Pipe selection depending on the diameter of cable / cable bundle

Outer diameter, mm Minimal inner diameter, mm Diameter of cables or cable bundle, mm
Minimal Diameter, mm Maximum diameter, mm
Outer diameter, mm Minimal inner diameter, mm Diameter of cables or cable bundle, mm
Minimal Diameter, mm Maximum diameter, mm
50 37 11.1 24.7
63 47 14.1 31.3
75 56 16.8 37.3
90 67 20.1 44.7
110 82 24.6 54.7
125 94 28.2 62.7
140 106 31.8 70.7
160 120 36.0 80.0
180 135 40.5 90.0
200 150 45.0 100.0
225 170 51.0 113.3
250 188 56.4 125.3
280 210 63.0 140.0

Corrugated piping system

ELECTROCOR

Single or double-layer flexible or rigid plastic pipes with inner solid wall and corrugated outer layer in red.

Application: piping systems protect electrical, telecom and signal cables against mechanical impact and aggressive environment.

Joining method: using fittings

Method of installation: Trench method

General properties

ELECTROCOR LIGHT

ELECTROCOR FLEX

ELECTROCOR

ELECTROCOR PRO

ELECTROCOR LIGHT

i

ELECTROCOR FLEX

i

ELECTROCOR

i

ELECTROCOR PRO

i

Diameters, dе, mm; DN/OD

50-110

50–200

50–250

75–250

Compression resistance

250 N

450 N

750 N

1250 N

Impact resistance

N (normal)

N (normal)

READ FURTHER

S (strong)

XS (extra strong)

Bending strength

flexible

flexible

rigid

rigid

Bending radius, not less than

3dе

3dе

20dе

20dе

Tightness of connections, GOST 14254-96: up to IP66

до IP66

Insulation resistance, MOm, more than

100

Electrical strength, min., not less than

15

Thermal stability at a temperature of 200°C, min., not less than

20

ELECTROCOR fittings

Diameters, mm; DN/OD

50

63

75

90

110

160

200

250

Diameters, mm; DN/OD

50

63

75

90

110

160

200

250

End cap

Clip coupler

i

Coupler

i

Sealing ring

Spacer

Spigot-and-socket piping system

ELECTROPIPE S

Feature: easy and quick installation thanks to spigot-and-socket connection (welding equipment and fittings are not required).

Application: piping system protects low-current wires and low-voltage cables against corrosive environment and mechanical impact (outside the transport infrastructure).

Joining method: spigot

General properties

ELECTROPIPE S

ELECTROPIPE PRO S

i

ELECTROPIPE S

ELECTROPIPE PRO S

i

Diameters, dе, mm; DN/OD

110-250

Compression resistance

250 N

450 N, 750 N, 1250 N

Impact resistance

N (normal)

READ FURTHER

S/XS (strong/extra strong)

Bending strength

rigid

rigid

Bending radius, not less than

200dе

200dе

Tightness of connections

up to IP41

IP55

with enhanced sealing ring

Insulation resistance, MOm, more than

100

Electrical strength, min., not less than

15

ELECTROPIPE S fittings

Diameters, mm; DN/OD

110

160

200

250

Diameters, mm; DN/OD

110

160

200

250

End cap

Coupler

Sealing ring

Multilayer piping system

ELECTROPIPE

Made from halogen-free plastic ELECTROPIPE do not emit harmful substances while burning. Solid wall has improved operating characteristics for protecting insulated electrical wires and /or cables from corrosive environment and mechanical impact at maximum transport load.

Outer (10% of wall thickness) red layer simplifies visual control of allowable cable pipe damage and network identification.

Connection method: butt fusion using heated tool or using electrofusion fitting.

Installation method: trench or trenchless including horizontal directional drilling. Open laying is available only for ELECTROPIPE pipe in black.

General properties

ELECTROPIPE

i

ELECTROPIPE PRO

i

ELECTROPIPE FR

i

ELECTROPIPE

i

ELECTROPIPE PRO

i

ELECTROPIPE FR

i

Diameter, dе, mm; DN/OD

50-280

Compression resistance

750 N, 1250 N

Impact resistance

S/XS (strong/extra strong)

READ FURTHER

Bending strength

rigid

Bending radius, not less than

20dе

Tightness of connections, GOST 14254-96 : up to IP66

IP68

Insulation resistance, MOm, more than

100

Electrical strength, min., not less than

15

Thermostability, min., not less than

20

i

20

i

500

i

Hot wire test, °C

750

960

Shore D hardness

i

60

66

66

Diameters, mm; DN/OD

50

63

75

90

110

160

200

250

280

ELECTROPIPE fittings

Diameters, mm; DN/OD

50

63

75

90

110

160

200

250

280

End cap

Coupler ELECTROPIPE

i

Coupler RADIUS

PE protective pipes for communication lines (PPP)

Double layer solid-wall pipes with gliding inner layer.

Application: mechanical protection of fiber optic lines from vibration and mechanical damage during installation underground, crossing water obstacles with and without digging-in, along the bridges and cable trays.

Installation method: trench, trenchless including horizontal directional drilling.

Connection method: butt fusion welding, electrofusion welding (using fittings) or using compression fittings Double layer solid-wall pipes with gliding inner layer.

Diameters, dе, mm

20–110

S (strong)

Bending radius, not less

20dе

IP Code

IP66

Thermal stability at 200°С, min., not less than

20

Friction coefficient, no more than

0,1

FTTx Mictotubing system

An FTTH (fibre to the home) network is a fibre-based access network, connecting the end user to a provider.

Installation options:

  • in existing networks;
  • trench;
  • inside the building (fire-resistant option is available)

Key advantages:

  • inner layer with low friction coefficient
  • wide range of colours: transparent, opaque and striped.

Special types:

  • protected against rodents;
  • reinforced;
  • protected against termites;
  • for air line;
  • waterproof.

PE cable manholes KKSP-PRO

PE manholes provide reliable mechanical protection of electric and cable lines from precipitation and temperature change. All manholes are tested for integrity.

Application: cable piping (low voltage and power systems) at various transport loads.

Key advantages:

  • reliable protection of electrical and telecom cables from precipitation and temperature changes;
  • integrity proved by laboratory testing;
  • great dielectric properties, thermal stability;
  • resistance to corrosion and possibility to install in aggressive grounds;
  • nominal ring stiffness of manhole shaft SN2, reinforced injection-moulded bottomi

Manholes design depends on the conditions of cable pipeline installation and determined by the project. Custom made manholes are available upon request. If necessary the shaft of the manhole can be produced with additional inner protective layer. Each manhole come with a drawing

Standard size of KKSP-PRO

Manhole type

i

Inner diameter, mm

i

Shaft height, mm

i

Overall height, mm
KKSP-PRO -2 1000 1386 1500
KKSP-PRO -3b 1300 1650 1770
KKSP-PRO -4 1600 1800 2014
KKSP-PRO -5 2000 1800 2028